Wired Motion PIR Sensor

The Wired Motion PIR Sensor detectors are high-performance, small form-factor PIR motion detectors. They offer a trouble-free, out-of-the-box experience to simplify the installation process and reduce installation time.

An advanced filter that allows the XDL12TT-AM to distinguish between the movement of trees and plants from that of an intruder.
It is designed to maintain optimum performance and reduce false alarms in environments with windy weather conditions and swaying vegetation.

The wired PIR Motion detector is an INPUT DEVICE. Therefore, the PIR-01 PIR motion detector is designed to provide detection of criminal intrusion through door frames and window frames. Into a protected area by sensing infrared energy (heat) emitting from an intruder’s body moving through a protected area.

Turn your lights on and off automatically. The motion sensors enable you to achieve major energy savings since the light is never on for longer than necessary.

The sleek, sturdy housing blends with any residential or commercial interior and is constructed of ABS plastic for superior shock and impact protection. It contains a convenient wiring channel, knockouts for mounting and wiring, and easy access to terminals.
Mounting screws are located in the rear cover, thus enabling an easier installation.

When moving objects are detected in the area, the detector will output the alarm signal that has been by the circuit, analyzed, and calculated by the microprocessor algorithm. It is suitable for various indoor scenes.

Featuring an extended detection range of up to 6 meters in all directions, the sensor offers protection all-encompassing, ideal for monitoring large spaces with a single device. One of these sensors is capable of completely controlling the entire room.

Connection and Installation

If your motion sensors need power, you can draw power from the Konnected device. This is based as long as you are powering the device with the correct voltage. Most motion sensors and alarm system components operate on 12V DC, so in that case, power the Konnected device with the 12V DC power adapter. Then you can draw power for your motion sensors. Thus from the AUX and – AUX on the bottom left of the device base.